STANDARD COMBINED ROLLER BEARING - 4.058

standard cr bearing

This page is a summary of the products that can be used in conjunction with the 4.058 standard combined roller bearing (88.4mm OD), including standard mounting plates, mating steel channels and flange clamps.

Originally used in fork trucks, combined roller bearings can be used in a variety of vertical & horizontal linear motion applications.
Not sure what to specify? Calculate which size you need using Hertzian Pressure.

Read our technical information on Combined Roller Bearings or view our application examples.

En Français? Voir notre catalogue ici.

Catalogue Data Sheet

combined roller bearings mounting plate rails

combined roller bearing 4.054

Part Number	D	T	d	H	h	B	A	S	r	Profile	Plate	3D Cad (step)	Data Sheet	C	C₀	Ca	C₀a
4.058	88.4	59	45	57	44	30	3.5	26	3	2811 3020	PL3			68	72	23	23

All dimensions are in mm and loads are in kN.

Static (C₀) and Dynamic (C) Load Capacities for radial and axial rollers. If used with mating steel profile, the limiting load is the Hertzian Pressure.

2811 STANDARD CHANNEL

Weight: 28.6kg/m
Material: S450 J2
Moment of Area (Wx): 127.8cm³

2811 is a hot rolled section made from S450J2 steel. The corresponding standard combined roller bearing is 4.058.
Other suitable bearings include 4.458, 4.076 & 2.2088.

CAD Files: Download the 2D dwg file and 3D step file.

3020 STANDARD CHANNEL

Weight: 34.1kg/m
Material: S450 J2
Moment of Area (Wx): 160cm³

3020 is a hot rolled I section made from S450J2 steel. The corresponding standard combined roller bearing is 4.058.
Other suitable bearings include 4.458.