HOME > COMBINED ROLLER BEARINGS > ECCENTRIC ADJUSTABLE CR BEARINGS

ECCENTRIC ADJUSTABLE COMBINED ROLLER BEARINGS - DIMENSION CHART

Combined roller bearings are available from stock in standard, adjustable & Jumbo ranges. Each bearing has a corresponding steel section (channel) and is available with mounting plate for ease of assembly. These adjustable combined roller bearings have the side (axial) roller mounted on an eccentric shaft which allows for adjustment in their height (h). Calculate which size you need.

BEARING Part Number	D mm	T mm	d mm	H mm	h mm	B mm	A mm	S mm	r mm	Weight kg	PROFILE Part Number	MOUNTING PLATE Part Number
4.454	62	42	30	37.5	30.5-32	20	4	20	3	0.53	2890	PLATE 0
4.455	70.1	48	35	44	36-37.5	23	4	20	4	0.80	2867	PLATE 1
4.456	77.7	54	40	48	37-38.5	23	3.5	26	4	1.00	2810	PLATE 2
4.457	77.7	54	40	40	29-30.5	23	3.5	26	4	0.87	3019
4.458	88.4	59	45	57	44-45.5	30	4	26	4	1.62	2811	PLATE 3
4.459	101.2	69	50	46	33-35	26	4.5	30	3	1.74	2912
4.460	107.7	69	55	54	40-42	31	4	30	5	2.27	3100
4.461	107.7	69	60	69	55-57	31	4	30	5	2.82	2862	PLATE 4
4.462	123	80	60	72.3	56-60	37	4.5	34	5	3.90	2891	PLATE 4
4.463	149	108	60	78.5	58.5-62.5	45	6	34	3	6.50	2757	PLATE 6

LOAD CAPACITIES Static and Dynamic Load Capacities for radial and axial rollers. If used with mating steel profile, the limiting load is the Hertzian Pressure.
BEARING REF	C kN	Co kN	Ca kN	Coa kN	PROFILE Part Number	PLATE Part Number	C= DYNAMIC LOAD CAPACITY FOR RADIAL ROLLER Co = STATIC LOAD CAPACITY FOR RADIAL ROLLER Ca = DYNAMIC LOAD CAPACITY FOR AXIAL ROLLER Coa=STATIC LOAD CAPACITY FOR AXIAL ROLLER
4.454	31	35.5	11	11	2890	PL0
4.455	45.5	51	11	11	2867	PL1
4.456	48	56.8	18	18	2810	PL2
4.457	48	56.8	18	18	3019
4.458	68	72	23	23	2811	PL3
4.459	73	82	25	27	2912
4.460	81	95	25	27	3100
4.461	81	95	25	27	2862	PL4
4.462	110	132	31	36	2891	PL4
4.463	151	192	31	36	2757	PL6