COMBINED ROLLER BEARINGS - Adjusting the axial roller position (4.4Xx series)

eccentric adjustable combined roller bearing

Scroll down for a video showing how to adjust the eccentric adjustable combined roller bearings.

Follow these simple steps:

1. Unscrew the four screws holding the front plate in position.

2. Rotate the axial bearing to the desired position.

3. Measure dimension marked 'A' (correlates to column 'A' on the dimension chart).

4. Insert and tighten the four screws holding the front plate in position. Use a drop of adhesive (eg. Loctite Studlock) on the screw thread to secure them permanently.

NB. The series 4.454 to 4.461 have splined eccentric shaft ends. 4.462 & 4.463 have hexagonal eccentric shaft ends. Both function in the same way

Read our technical information on Combined Roller Bearings or view our application examples.

Catalogue Data Sheet

adjusting the eccentric adjustable bearing

Related Products and Links

Eccentric adjustable combi bearings
Mounting plates for combined bearings
Standard channels (rails / steel profiles) for standard, eccentric and shim adjustable bearings
Flanged clamps for fixing channels
Technical data for combined roller bearings and steel profiles
Hertzian pressure calculations
Application Examples for combined roller bearings and steel profiles
Standard combined roller bearings