TRACK BEARINGS - DATA:
Track bearings can be used to form a complete linear motion guidance system when combined with a carriage & rail. They can also run directly onto a shaft in customers' own carriages or on spigots.
LR references are for bearings, G- & E- references are for concentric & eccentric spigots respectively.
Bearings:
 |
| Part | d | D | B | A | a | s | e | C (kN) | Co (kN) |
|---|---|---|---|---|---|---|---|---|---|
| LR25-_05 | 5 | 17 | 7 | 8.5 | 25 | 5 | 6.9 | 1.2 | 0.8 |
| LR27-_05 | 5 | 17 | 7 | 8 | 27 | 6 | 1.27 | 0.89 | |
| LR36-_08 | 8 | 24 | 11 | 12.5 | 37 | 8 | 11.5 | 3.3 | 2.1 |
| LR52-_12 | 12 | 35 | 15.9 | 15.9 | 51.3 | 10 | 8.6 | 5.1 | |
| LR64-_15 | 15 | 47 | 19 | 19 | 63.3 | 10 | 14 | 7.7 | |
| LR80-_20 | 20 | 52 | 20.6 | 22.6 | 79 | 16 | 27 | 15.6 | 9.1 |
Spigots:
 |
| Part | d | D | B | A | a | s | e | SW |
|---|---|---|---|---|---|---|---|---|
| G25-_M24 | 5 | 9 | 20 | 17.5 | 4.5 | M4 | 3 | |
| G36-_M26 | 8 | 12 | 29 | 26.5 | 8.5 | M6 | 5 | |
| G52-_M10 | 12 | 20 | 42 | 36 | 14 | M10 | 8 | |
| G64-_M10 | 15 | 20 | 50 | 44 | 19.6 | M10 | 8 | |
| B25-_M04 | 5 | 9 | 17 | 14.5 | 7 | M4 | 3 | |
| B36-_M06 | 8 | 12 | 24.5 | 22 | 10.5 | M6 | 5 | |
| B54-_M10 | 12 | 20 | 38 | 32 | 15.5 | M10 | 8 | |
| E25-_M04 | 5 | 9 | 19 | 16.5 | 9 | M4 x5 |
4h6 | 3 |
| E36-_M06 | 8 | 12 | 29 | 26.5 | 15 | M6 x8 |
6h6 | 5 |
| E54-_M10 | 12 | 20 | 43.5 | 37.5 | 21 |
M10 x12 |
10h6 | 8 |